Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 10 Vise Block US Specs & Supply
Reliable Rifle Bench & Vise Blocks by Sinclair in US specification & supply
|
US gunsmith supply: The sinclair vise block is the perfect tool for securely holding your ar-15/ar-10 in a bench vise. The vise block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The vise block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. Ar-10 model only fits armalite ar-10 pattern rifles, does not fit dpms/sr25 pattern rifles. Mfg: sinclair international. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Sinclair. US supply MPN: 23150. Sinclair international ar 15/ar 10 ar vise blocks sinclair ar 10 vise block. Distributor SKU: 749003696-749002689-11266.
 Indicative Price: USD 26.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more gunsmith equipment, tools, supplies & gun parts : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Mauser Receiver Holding Fixture Mauser Receiver Fixture US Specs & Supply
USD 89.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Provides complete access to these hard-to-hold receivers, without the worry of crushing or damage. Securely holds mauser receivers and barreled actions in a bench vise, drill press or milling machine when drilling and tapping for scope bases, polishing, bolt lapping, milling or other modifications. The receiver is rigidly clamped to the fixture using a plate inside the frame rails and/or the stock mounting screws. Fits military and commercial m98 actions. Mfg: brownells specs: steel, blued. 9" (22.8cm) long, 1" (2.5cm) wide. Includes clamp plate and bolt. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-919-000. Brownells mauser receiver holding fixture mauser receiver fixture. Distributor SKU: 080919000-080919000-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Bench Block For Remington Bolts US Specs & Supply
USD 22.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: This bench block is specifically designed for use with sinclair bolt tools for remington bolt actions. This bench block secures both remington bolts and firing pins in the proper position for driving out pins. Machined from black delrin so it will not damage any external finishes and features a machined ""well"" properly located to prevent the loss of pins. Mfg: sinclair international. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Sinclair. US supply MPN: 22525. Sinclair bench block for remington bolts. Distributor SKU: 749002695-749002695-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Plastix Plus Ar 15/M16 Display Stands Wall Mount Display Stand US Specs & Supply
USD 42.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: High-density, thermoplastic-welded polyethylene stands securely hold your ar-15 for display or cleaning and maintenance chores. Each stand has a 7" post with beveled edges that fits in the magwell like a magazine. Barrel support model features a wide display stand with enclosed tray and a barrel support at one end. Parts tray model has a centered resting post and no barrel support with plenty of room in the tray to keep small parts from straying. Wall-mount model keeps your weapon off the ground and includes a holder for one magazine. Mfg: plastix plus llc specs: high-density, thermoplastic-welded polyethylene, black. Barrel support/parts tray 18" (45.7cm) long, 6β½" (16.5cm) wide, 7βό" (18.4cm) high. Wall-mount 7βό" (18.4cm) long, 4β½" (11.4cm) wide, 6" (15.2cm) high. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Plastix. US supply MPN: PPAR97. Plastix plus ar 15/m16 display stands wall mount display stand. Distributor SKU: 100005253-100005252-11266.
More Details : click here
SEARCH this site : click here
|
|
|
The Device Manufacturing Ar 15/M16 Upper Receiver Fixture Mk1mod0 Device US Specs & Supply
USD 299.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Professional grade ar upper receiver fixture. Robust fixture designed for years of hard use. Quick, intuitive interface that allows rapid building/rebuilding and repair of the entire upper receiver of the ar15/m16/m4 family of rifles/carbines/pistols. Designed to allow all upper receiver parts to be installed or removed without interference. Designed with rail systems in mind, the device has clearance for most rail systems to allow installation and removal while the upper is securely held. Holds receiver from the inside via the bolt carrier raceway and charging handle raceway by way of a "t" interface. Front and rear lugs are controlled along with the entire bottom receiver flat mfg: the device manufacturing llc. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Device. US supply MPN: MK1MOD0DEVICE. The device manufacturing ar 15/m16 upper receiver fixture mk1mod0 device. Distributor SKU: 100022745-100022745-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Xs Armorers Block For Ar Platforms Xs Armorer's Block For Ar Platforms US Specs & Supply
USD 73.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: This upper receiver armorer's block will allow the gunsmith or enthusiast to assemble, modify, or maintain most ar pattern modern sporting rifles. While most blocks will only fit one specific style, the xs universal block provides the versatility need to work on any ar pattern upper receiver: ar-15, ar-10, sr25, or dmps gii. This versatility, plus the reliability of an xs sights made in the usa aluminum product, is a one size fits all solution. Mfg: xs sight systems. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by XS. US supply MPN: AR7000AB1. Xs armorers block for ar platforms xs armorer's block for ar platforms. Distributor SKU: 006000200-006000200-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Upper Receiver Action Block US Specs & Supply
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the ar-15/m16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, n mfg: brownells specs: injection-molded rynite, black. Fits a1, a2, and standard flattop receivers. Block, 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert, 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. Lbs. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-000-661. Brownells ar 15/m16 upper receiver action block. Distributor SKU: 080000661-702003015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Lower Receiver Vise Block Action Block & Lower Vise Block Set US Specs & Supply
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won't be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Fits tightly in mos mfg: brownells specs: high-density urethane plastic, black. 5" (12cm) high, 2βό" (5.7cm) wide, βύ" (19cm) thick. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-000-659. Brownells ar 15/m16 lower receiver vise block action block & lower vise block set. Distributor SKU: 080000659-702004015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Receiver Contouring Fixture US Specs & Supply
USD 128.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Provides a precise base for machining surplus military receivers. Used with brownells receiver facing mandrels, the receiver rotates around its own axis for removing pits, unwanted markings and re-contouring front rings. Lets you remove the charger guide from mausers, clean up enfield rear bridges and other custom work. Ensures that the work is square to the receiver. Mfg: brownells specs: steel, blued. 13" (33cm) long, 3" (7.6cm) wide. Use with large ring and small ring mausers, p-14 and p-17 enfields, 03 springfield, rem. 700, win m-70. Click here for receiver facing mandrels. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-914-000. Brownells receiver contouring fixture. Distributor SKU: 080914000-080914000-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips 308 Ar morers Block US Specs & Supply
USD 21.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: This is one of the most useful maintenance accessories available for an ar-10. Simply bolt or clamp securely to a bench or other work surface, place an ar 308 rifle onto the block inside the magazine well, and the rifle is held in place for cleaning, maintenance, or storage. 1-piece glass filled polymer design fits rifles that use sr-25 pattern magazines weight: .7oz 6-1/8" tall x 2" long(at the base) x 4-1/4" wide (at the base) 1/4" mounting holes mfg: ergo grips. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Ergo. US supply MPN: 4989. Ergo grips 308 ar morers block. Distributor SKU: 573000088-573000088-11266.
More Details : click here
SEARCH this site : click here
|
|
|
|
Brownells Ar 15/M16 Upper Receiver Action Block & Lower Vise Block Set US Specs & Supply
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the ar-15/m16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, n mfg: brownells specs: injection-molded rynite, black. Fits a1, a2, and standard flattop receivers. Block, 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert, 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. Lbs. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-000-659. Brownells ar 15/m16 upper receiver action block & lower vise block set. Distributor SKU: 080000659-702003015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 15 Vise Block US Specs & Supply
USD 19.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: The sinclair vise block is the perfect tool for securely holding your ar-15/ar-10 in a bench vise. The vise block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The vise block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. Ar-10 model only fits armalite ar-10 pattern rifles, does not fit dpms/sr25 pattern rifles. Mfg: sinclair international. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Sinclair. US supply MPN: 14150. Sinclair international ar 15/ar 10 ar vise blocks sinclair ar 15 vise block. Distributor SKU: 749002689-749002689-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Tapco Weapons Accessories Sks Vise Block US Specs & Supply
USD 11.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Keep your sks secure with the tapco magazine vise block. This block, made from a durable composite, locks into the mag well of the sks just as a magazine would. The block can then be inserted into a vise and locked into place, keeping your sks secure while you work on it. The block features a compact design and hang hole for your peg board for easy storage. Mfg: tapco weapons accessories. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Tapco. US supply MPN: 16797. Tapco weapons accessories sks vise block. Distributor SKU: 100017640-100017640-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 Bev Block Ar15/M4 US Specs & Supply
USD 47.45
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: The bev block (barrel extension vise) is an all-in-one, compact vise block tool for ar assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and magpul polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability adn included pin keeps upper in proper position. The bev can also be turned over and used as a mag well vise block to support t mfg: magpul. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Magpul. US supply MPN: MAG536. Magpul ar 15 bev block ar15/m4. Distributor SKU: 100015280-100015280-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Lower Receiver Vise Block US Specs & Supply
USD 49.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won't be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Fits tightly in mos mfg: brownells specs: high-density urethane plastic, black. 5" (12cm) high, 2βό" (5.7cm) wide, βύ" (19cm) thick. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-000-662. Brownells ar 15/m16 lower receiver vise block. Distributor SKU: 080000662-702004015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 10 Vise Block US Specs & Supply
|
 Copyright © USAGunsmith.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
