Brownells Ar 15/M16 Lower Receiver Vise Block US Specs & Supply
Reliable Rifle Bench & Vise Blocks by Brownells in US specification & supply
|
US gunsmith supply: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won't be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Fits tightly in mos mfg: brownells specs: high-density urethane plastic, black. 5" (12cm) high, 2βό" (5.7cm) wide, βύ" (19cm) thick. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-000-662. Brownells ar 15/m16 lower receiver vise block. Distributor SKU: 080000662-702004015-11266.
 Indicative Price: USD 49.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more gunsmith equipment, tools, supplies & gun parts : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Magpul Ar 15 Bev Block Ar15/M4 US Specs & Supply
USD 47.45
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: The bev block (barrel extension vise) is an all-in-one, compact vise block tool for ar assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and magpul polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability adn included pin keeps upper in proper position. The bev can also be turned over and used as a mag well vise block to support t mfg: magpul. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Magpul. US supply MPN: MAG536. Magpul ar 15 bev block ar15/m4. Distributor SKU: 100015280-100015280-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Ar 15 Bolt Vise US Specs & Supply
USD 18.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Our bolt vise helps you disassemble your ar-15 bolt easily and without losing any parts. The main function of the tool is to compress the ejector so you can remove the spring pin easily. This enables you to release the pressure on the ejector slowly so the ejector and spring don't go flying off your workbench. The ejector and spring can be replaced if needed and the bolt reassembled easily. The tool cradles the bolt and holds it firmly in place while the screw assembly compresses the ejector. A hole in the vise allows the pin to drop free. The tool can also be used to hold the bolt securely while replacing gas rings and replacing the extractor. Note: we recommend you replace the ejecto mfg: sinclair international. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Sinclair. US supply MPN: 14950. Sinclair ar 15 bolt vise. Distributor SKU: 749003708-749003708-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Tapco Weapons Accessories Sks Vise Block US Specs & Supply
USD 11.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Keep your sks secure with the tapco magazine vise block. This block, made from a durable composite, locks into the mag well of the sks just as a magazine would. The block can then be inserted into a vise and locked into place, keeping your sks secure while you work on it. The block features a compact design and hang hole for your peg board for easy storage. Mfg: tapco weapons accessories. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Tapco. US supply MPN: 16797. Tapco weapons accessories sks vise block. Distributor SKU: 100017640-100017640-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Tangodown Armorer's Blocks Scar Armorer's Block Set US Specs & Supply
USD 181.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: High-density polymer blocks allow critical subassemblies of the sof command assault rifle (scar) to be tightly clamped in a vise without danger of crushing, twisting, or otherwise distorting them. Provides secure support for safe, effective cleaning, adjustment, maintenance, and repair without marring or scratching the finish. Available as a complete set or separate components. Upper receiver/barrel block surrounds the front sight/gas block to securely hold the barrel module while also protecting the exposed portion of the gas system leaving your upper free to be worked on. Lower receiver/trigger module block locks into the magazine well and absorbs all the clamping force to protect the s mfg: tangodown specs: high-density, injection-molded polymer. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Tangodown. US supply MPN: ABSFNSCAR001. Tangodown armorer's blocks scar armorer's block set. Distributor SKU: 100003431-100003431-11266.
More Details : click here
SEARCH this site : click here
|
|
|
The Device Manufacturing Ar 15/M16 Upper Receiver Fixture Mk1mod0 Device US Specs & Supply
USD 299.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Professional grade ar upper receiver fixture. Robust fixture designed for years of hard use. Quick, intuitive interface that allows rapid building/rebuilding and repair of the entire upper receiver of the ar15/m16/m4 family of rifles/carbines/pistols. Designed to allow all upper receiver parts to be installed or removed without interference. Designed with rail systems in mind, the device has clearance for most rail systems to allow installation and removal while the upper is securely held. Holds receiver from the inside via the bolt carrier raceway and charging handle raceway by way of a "t" interface. Front and rear lugs are controlled along with the entire bottom receiver flat mfg: the device manufacturing llc. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Device. US supply MPN: MK1MOD0DEVICE. The device manufacturing ar 15/m16 upper receiver fixture mk1mod0 device. Distributor SKU: 100022745-100022745-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Upper Receiver Action Block & Lower Vise Block Set US Specs & Supply
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the ar-15/m16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, n mfg: brownells specs: injection-molded rynite, black. Fits a1, a2, and standard flattop receivers. Block, 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert, 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. Lbs. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-000-659. Brownells ar 15/m16 upper receiver action block & lower vise block set. Distributor SKU: 080000659-702003015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Bench Block For Remington Bolts US Specs & Supply
USD 22.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: This bench block is specifically designed for use with sinclair bolt tools for remington bolt actions. This bench block secures both remington bolts and firing pins in the proper position for driving out pins. Machined from black delrin so it will not damage any external finishes and features a machined ""well"" properly located to prevent the loss of pins. Mfg: sinclair international. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Sinclair. US supply MPN: 22525. Sinclair bench block for remington bolts. Distributor SKU: 749002695-749002695-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 10 Vise Block US Specs & Supply
USD 26.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: The sinclair vise block is the perfect tool for securely holding your ar-15/ar-10 in a bench vise. The vise block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The vise block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. Ar-10 model only fits armalite ar-10 pattern rifles, does not fit dpms/sr25 pattern rifles. Mfg: sinclair international. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Sinclair. US supply MPN: 23150. Sinclair international ar 15/ar 10 ar vise blocks sinclair ar 10 vise block. Distributor SKU: 749003696-749002689-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Receiver Contouring Fixture US Specs & Supply
USD 128.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Provides a precise base for machining surplus military receivers. Used with brownells receiver facing mandrels, the receiver rotates around its own axis for removing pits, unwanted markings and re-contouring front rings. Lets you remove the charger guide from mausers, clean up enfield rear bridges and other custom work. Ensures that the work is square to the receiver. Mfg: brownells specs: steel, blued. 13" (33cm) long, 3" (7.6cm) wide. Use with large ring and small ring mausers, p-14 and p-17 enfields, 03 springfield, rem. 700, win m-70. Click here for receiver facing mandrels. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-914-000. Brownells receiver contouring fixture. Distributor SKU: 080914000-080914000-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips Ar 15/M16 Spike's Block Ar 15 Spike's Block US Specs & Supply
USD 25.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: One-piece, molded polymer stand securely supports the lower receiver for cleaning, maintenance or storage. Base has a small footprint and clamps to your workbench, while the top fits in the magwell of any ar-15 pattern rifle. Grooves in both sides of insert accept the mag catch to lock your rifle on the block. Can also be used as a wall mount for your rifle. Mfg: ergo grips specs: molded, glass-filled resin, black. 4-5/8" (11cm) long, 2" (5.1cm) wide, 6-1⁄8" (15.5cm) tall. 4.3 oz. (122g) wt. Permanent installation requires four βό" bolts or screws, not included. Assembly includes one block only. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Ergo. US supply MPN: 4996. Ergo grips ar 15/m16 spike's block ar 15 spike's block. Distributor SKU: 573000063-573000063-11266.
More Details : click here
SEARCH this site : click here
|
|
|
|
Brownells Ar 15/M16 Lower Receiver Vise Block Action Block & Lower Vise Block Set US Specs & Supply
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won't be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Fits tightly in mos mfg: brownells specs: high-density urethane plastic, black. 5" (12cm) high, 2βό" (5.7cm) wide, βύ" (19cm) thick. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Brownells. US supply MPN: 080-000-659. Brownells ar 15/m16 lower receiver vise block action block & lower vise block set. Distributor SKU: 080000659-702004015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Ar 15/M4 Reaction Block (Mil Spec Buffer Tube Only) US Specs & Supply
USD 87.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: The geissele reaction block is designed to aid in the assembly of lower receivers. Once the armorer has installed the buffer tube onto the lower; the buffer tube and lower receiver assembly can be slid into the reaction block at the 12, 3, 6 and 9 o'clock positions. This allows the armorer to rotate the lower in 90 degree increments in the block simply by loosening the provided nylon screws, removing the lower, and sliding it back in at the desired orientation. The reaction block provides an ultra-stable platform for performing an array of lower receiver operations, as well as making the installation of the buffer retainer nut quick and easy. All while keeping both hands of the armo mfg: geissele automatics llc. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Geissele. US supply MPN: 5314. Geissele automatics ar 15/m4 reaction block (mil spec buffer tube only). Distributor SKU: 100016578-100016578-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips 308 Ar morers Block US Specs & Supply
USD 21.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: This is one of the most useful maintenance accessories available for an ar-10. Simply bolt or clamp securely to a bench or other work surface, place an ar 308 rifle onto the block inside the magazine well, and the rifle is held in place for cleaning, maintenance, or storage. 1-piece glass filled polymer design fits rifles that use sr-25 pattern magazines weight: .7oz 6-1/8" tall x 2" long(at the base) x 4-1/4" wide (at the base) 1/4" mounting holes mfg: ergo grips. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Ergo. US supply MPN: 4989. Ergo grips 308 ar morers block. Distributor SKU: 573000088-573000088-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 15 Vise Block US Specs & Supply
USD 19.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks US Specs & Supply
US gunsmith supply: The sinclair vise block is the perfect tool for securely holding your ar-15/ar-10 in a bench vise. The vise block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The vise block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. Ar-10 model only fits armalite ar-10 pattern rifles, does not fit dpms/sr25 pattern rifles. Mfg: sinclair international. Find here reliable & durable gunsmith supplies including rifle bench & vise blocks by Sinclair. US supply MPN: 14150. Sinclair international ar 15/ar 10 ar vise blocks sinclair ar 15 vise block. Distributor SKU: 749002689-749002689-11266.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Ar 15/M16 Lower Receiver Vise Block US Specs & Supply
|
 Copyright © USAGunsmith.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
