Weaver Windage Adjustable Grand Slam Rings X High 1" Matte Blue US Specs & Supply
Reliable Gun Scope Rings by Weaver in US specification & supply
|
US gunsmith supply: Strong, all-steel rings clamp securely to weaver-style rails and two torx screws hold your scope rigidly in place. Windage adjustable ring bases allow for increased left to right positioning on front and rear alignment of rings and scopes while leaving the windage adjustment on the scope for accurate fine-tuning at the range. Rings also allow for perfect return to zero when remounting scopes. Mfg: weaver specs: steel. Black, matte finish. 1" (2.5cm) diameter. Heights measured from top of base to bottom of ring. Med., .180" (.5cm); high, .350" (.8cm); x-high, .575" (1.5cm). Torx wrench included. Find here reliable & durable gunsmith supplies including gun scope rings by Weaver. US supply MPN: 49320. Weaver windage adjustable grand slam rings x high 1" matte blue. Distributor SKU: 955000101-955000096-21279.
 Indicative Price: USD 32.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more gunsmith equipment, tools, supplies & gun parts : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Weaver Sure Grip Rings 1" Medium Gloss Rings US Specs & Supply
USD 23.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: Steel caps with two screws per side provide extra strong, 4-screw, clamping power. Helps ensure that reticle stays square while tightening top screws. Large clamp nut locks rings to base, provides easy scope installation, removal; and accurate return to zero after re-installation. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Black, gloss or matte finish. Heights (above base): 1" (2.5cm) diameter, med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). Find here reliable & durable gunsmith supplies including gun scope rings by Weaver. US supply MPN: 49160. Weaver sure grip rings 1" medium gloss rings. Distributor SKU: 955000007-955000007-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Quick Release Mounting System Rings Quick Release Rings 1 In Low Matte US Specs & Supply
USD 26.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: Leupold's quick release mounting system allows the shooter to remove the scope with just a twist of the levers and reinstall it in only seconds with no loss of zero. Rings are made of steel and sold in pairs. Extension rings include one standard ring and one that is extended 5/8" to allow mounting of a wide variety of scopes. Mfg: leupold ring heights measured from top of base to center of ring. Super low; .550" (14mm). Low; .650" (16.5mm). Medium; .770" (19.5mm). High .900" (22.8mm), super high; 1.0" (2.5cm). Find here reliable & durable gunsmith supplies including gun scope rings by Leupold. US supply MPN: 49971. Leupold quick release mounting system rings quick release rings 1 in low matte. Distributor SKU: 526471796-526471796-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon S Series Steel Rings 30mm Medium Matte Rings US Specs & Supply
USD 54.95
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: The s-series rings incorporate a square, stainless steel recoil control key in both the front and rear rings. This ensures a "no slip" positive recoil surface across the entire slot of the base that is capable of withstanding extreme recoil. The s-series rings utilize four t-15 torx-style socket cap screws per ring for secure optics mounting for increased strength and riflescope alignment. The ring band width is also substantially wider than typical rings, offering more ring-to-scope clamping area to hold the riflescope firmly in place. Find here reliable & durable gunsmith supplies including steel construction with matte black finish fits all s-series/waever/warne/picatinny-style bases mfg: nikon. Find here reliable & durable gunsmith supplies including gun scope rings by Nikon. US supply MPN: 16177. Nikon s series steel rings 30mm medium matte rings. Distributor SKU: 100017177-100017175-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce Ultralight Rings 30mm Low .885" 4 Screw Ultralight Rings US Specs & Supply
USD 165.00
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: Designed to fit mil-std. 1913 scope bases, nightforce rings are precisely manufactured to match the machined recess of a nightforce mil-std. 1913 base, providing perfect alignment and accuracy. Nightforce rings are designed and produced in-house to exacting specifications entirely out of steel or from 7075-t6 aluminum with beta series titanium crossbolts and jaws. All nightforce rings are 100% micro-radiused and honed in pairs for perfect fit of 30mm scope tubes to prevent the possibility of the rings damaging your scope. Mfg: nightforce ring heights are measured from the top of the base to the center of the ring. Find here reliable & durable gunsmith supplies including gun scope rings by Nightforce. US supply MPN: A118. Nightforce ultralight rings 30mm low .885" 4 screw ultralight rings. Distributor SKU: 749012011-749012011-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance Max 50 Scope Rings 34mm Medium Aluminum Max 50 Rings US Specs & Supply
USD 189.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: The max-50 rings are on inch wide, giving them 60% more holding power than any other ring available from badger ordnance. Utilizing 6 #8-40 torx screws to distribute the load providing the maximum amount of holding power while minimizing the chance of damaging the scope. Machined from steel or aluminum as serialized matched pairs. Mil std 1913 compatable, designed for the demanding .50 bmg round. Mfg: badger ordnance. Find here reliable & durable gunsmith supplies including gun scope rings by Badger. US supply MPN: 30678. Badger ordnance max 50 scope rings 34mm medium aluminum max 50 rings. Distributor SKU: 093000097-093306110-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Tps Products Tsr Picatinny Scope Rings Tsr Aluminum Rings 1" High US Specs & Supply
USD 90.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: Tsr series rings, precisely machined from an aluminum billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to mil-std 1913 (picatinny) bases. Mfg: tps products, llc. Specs: 7075-t651 aluminum alloy, matte black, hard anodized to mil-a-8625 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm, high: 1.225" (31.1mm). Find here reliable & durable gunsmith supplies including gun scope rings by TPS. US supply MPN: 30522. Tps products tsr picatinny scope rings tsr aluminum rings 1" high. Distributor SKU: 100000953-100000951-21279.
More Details : click here
SEARCH this site : click here
|
|
|
S&K Kontoured Verticle Split Rings Smooth Kontoured Verticle Rings 30mm Hi Matte US Specs & Supply
USD 73.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: All s&k rings are fully machined out of solid steel bar stock, tumble finished to remove all burrs, and have a 3/8" diameter stud that locks into a 3/8" hole or slot in the base which provides windage adjustment. The rings are locked into position by tightening cooperative cone pointed set screws. The rings are precision bored diameter and, being machined rather than extruded or stamped, form a precision fit that will not slip under recoil. They are nicely contoured and trim in appearance. Rings are tumble finished and blued to achieve a military-type dull or nonglare black finish that matches the black anodized insta-mount bases. Bases need purchased separately. Mfg: s&k. Find here reliable & durable gunsmith supplies including gun scope rings by S&K. US supply MPN: V30HB. S&k kontoured verticle split rings smooth kontoured verticle rings 30mm hi matte. Distributor SKU: 794500030-794000001-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance 34mm Tactical Rings 34mm Medium High Steel Rings US Specs & Supply
USD 189.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: Precision-machined, tactical ring sets provide strong, rigid mounting to securely hold large diameter, 34mm scope tubes, like schmidt & bender, on hard-recoiling guns. Robust, hex clamping nuts and weaver-style clamps lock rings tightly on weaver and picatinny mounts. Ring cap is secured with torx screws. Each set is serial-numbered to guarantee a precision-matched pair. Available in 1", 1.125 and 1.275" ring heights, steel or aluminum depending on model. Mfg: badger ordnance specs: 1" & 1.125" steel, matte black oxide finish. 1.275", max-alloy aluminum, black, matte, anodized finish. Ring heights measured from top of base to inside center of rings. Available in 1" (25.4mm), 1.25" (2.9cm) and 1.275" (31.9cm) ring heights. Find here reliable & durable gunsmith supplies including gun scope rings by Badger. US supply MPN: 30661. Badger ordnance 34mm tactical rings 34mm medium high steel rings. Distributor SKU: 093000035-093000017-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Fixed Rings 30mm Medium Fixed Rings Matte Black US Specs & Supply
USD 47.59
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: Maxima fixed rings are designed to be the strongest, most durable fixed mount system available. Typical steel scope mounts in this class use only 2 screws per ring, have a narrower clamping band and in most cases only absorb recoil in the front ring. Maxima fixed rings utilize 4 t-15 torx style socket cap screws for secure optics mounting. The maxima fixed series fit weaver style cross slot bases and incorporate a warne square stainless steel recoil control key in both the front and rear rings. This ensures a "no slip" positive recoil surface across the entire slot of the base and is capable of withstanding the heaviest of recoil. The maxima square recoil key also protects aga mfg: warne mfg. Company specs: steel, powder coated black (reg.), matte blue (matte), or silver alloy in matte silver (silver) finish. Height measured from top of base to inside bottom of ring. Available in low, .250" (6.35mm); medium, .375" (9.5mm); high, .525" (13.3mm). Find here reliable & durable gunsmith supplies including gun scope rings by Warne. US supply MPN: 214M. Warne mfg. company maxima fixed rings 30mm medium fixed rings matte black. Distributor SKU: 947005322-947005121-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Quick Detach Scope Rings 30mm Low Matte Blue Rings US Specs & Supply
USD 100.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: Include precision machined, qd levers for fast, easy scope installation and removal, plus button-head screws for optional fixed ring application if desired. Mfg: talley specs: steel, blue, satin finish or stainless steel (ss), natural finish. Models available for 1" or 30mm diameter scope tubes. Ring heights measured from top of base to bottom of ring. Low, .300" (7.62mm). Medium, .400" (10.16mm). High, .500" (12.7mm). X high, .600" (15.2mm). Fit talley bases. Find here reliable & durable gunsmith supplies including gun scope rings by Talley. US supply MPN: 600003. Talley quick detach scope rings 30mm low matte blue rings. Distributor SKU: 874025301-874025101-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon S Series Steel Rings 1" Medium Matte Rings US Specs & Supply
USD 49.95
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: The s-series rings incorporate a square, stainless steel recoil control key in both the front and rear rings. This ensures a "no slip" positive recoil surface across the entire slot of the base that is capable of withstanding extreme recoil. The s-series rings utilize four t-15 torx-style socket cap screws per ring for secure optics mounting for increased strength and riflescope alignment. The ring band width is also substantially wider than typical rings, offering more ring-to-scope clamping area to hold the riflescope firmly in place. Find here reliable & durable gunsmith supplies including steel construction with matte black finish fits all s-series/waever/warne/picatinny-style bases mfg: nikon. Find here reliable & durable gunsmith supplies including gun scope rings by Nikon. US supply MPN: 16156. Nikon s series steel rings 1" medium matte rings. Distributor SKU: 100017175-100017175-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Picatinny Scope Rings 30mm Extra High (1.375") Steel Rings US Specs & Supply
USD 99.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: These rings are precision machined to true mil-std 1913 specs to fit picatinny-type bases such as brownells modular flattop riser mount and picatinny scope bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong u.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a u.S. Quarter in a pinch. Crossbolt has a square shank that serves as a recoil lug to solidly engage scope base when properly installed mfg: brownells specs: rings sold in pairs. Models available to fit 1" and 30mm scope bodies. Steel, 4140 billet steel, black, matte, oxide finish. Aluminum, 6061 t6 aluminum billet, hardcoat anodized black, matte. Heights measured from top of base to center of ring: low, .825" (2.1cm); med., 1&quo. Find here reliable & durable gunsmith supplies including gun scope rings by Brownells. US supply MPN: 080-000-741. Brownells picatinny scope rings 30mm extra high (1.375") steel rings. Distributor SKU: 080000741-080000436-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver Top Mount Rings 1" High Satin Blue US Specs & Supply
USD 25.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: Heights: low and medium for scopes w/objective diameters to approximately 1.75"(44.45mm). High for objectives above 1.75". Extra high for scopes with objectives up to 60mm. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Satin blue, matte blue or brushed stainless finish. Height (above base): 1" diameter, low, .090" (2.28mm); med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). 30mm diameter, low, .290" (7.3mm); high, .485" (12mm. Find here reliable & durable gunsmith supplies including gun scope rings by Weaver. US supply MPN: 49050. Weaver top mount rings 1" high satin blue. Distributor SKU: 955490301-955490078-21279.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Tactical Rings 1 Inch Extra High Matte US Specs & Supply
USD 103.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specs & Supply
US gunsmith supply: Picatinny tactical rings and bases, precision-machined from steel for maximum strength and reliability. Rugged, 1" and 30mm tactical rings feature a robust, stainless steel crosslug that will not swage, peen or deform under heavy recoil. Ensures consistent return-to-zero for optics that are removed and re-attached. Three, torx-style fasteners secure the vertically split ring halves at the top to prevent scope shift. Large, clamping nut at bottom provides exceptional holding power. One-piece, tactical bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 20 moa forward angle fo mfg: warne mfg. Company specs: rings: steel, matte black, powder coat finish. Medium, .375" (9.5mm) high. High, .525" (13.3mm) high. Extra-high, .650" (16.5mm) high. Ultra-high, .935" (23.7mm) high. Bases: 12l14 carbon steel, powder coated, matte black. Available in standard or 20 moa. Savage bases. Find here reliable & durable gunsmith supplies including gun scope rings by Warne. US supply MPN: 603M. Warne mfg. company maxima tactical rings 1 inch extra high matte. Distributor SKU: 947000122-947000112-21279.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Weaver Windage Adjustable Grand Slam Rings X High 1" Matte Blue US Specs & Supply
|
 Copyright © USAGunsmith.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
