Tangodown Armorer's Blocks Scar Upper Receiver/Barrel Vise Block US Specs & Supply
Reliable Rifle Barrel Tools by Tangodown in US specification & supply
|
US gunsmith supply: High-density polymer blocks allow critical subassemblies of the sof command assault rifle (scar) to be tightly clamped in a vise without danger of crushing, twisting, or otherwise distorting them. Provides secure support for safe, effective cleaning, adjustment, maintenance, and repair without marring or scratching the finish. Available as a complete set or separate components. Upper receiver/barrel block surrounds the front sight/gas block to securely hold the barrel module while also protecting the exposed portion of the gas system leaving your upper free to be worked on. Lower receiver/trigger module block locks into the magazine well and absorbs all the clamping force to protect the s mfg: tangodown specs: high-density, injection-molded polymer. Find here reliable & durable gunsmith supplies including rifle barrel tools by Tangodown. US supply MPN: 100-003-470. Tangodown armorer's blocks scar upper receiver/barrel vise block. Distributor SKU: 100003470-100003431-11263.
 Indicative Price: USD 84.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more gunsmith equipment, tools, supplies & gun parts : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells 308 Ar Barrel Extension Torque Tools 308ar Barrel Extension Torque Tool US Specs & Supply
USD 49.99
(Indicative price - actual current price possibly lower)
Rifle Barrel Tools US Specs & Supply
US gunsmith supply: Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a β½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the torque tool in the back of the receiver until the teeth lock into the locking lugs in the barrel mfg: brownells specs: machined steel, black oxide finish. 10" (25.4cm) long, 1.18" (3cm) diameter. Requires a β½" square drive torque wrench. Instructions included. Fits .308 dpms pattern uppers/barrel extensions except the new g2 versions. Find here reliable & durable gunsmith supplies including rifle barrel tools by Brownells. US supply MPN: 100571. Brownells 308 ar barrel extension torque tools 308ar barrel extension torque tool. Distributor SKU: 080001040-080001040-11263.
More Details : click here
SEARCH this site : click here
|
|
|
Surefire Bore Alignment Rod 6.5mm US Specs & Supply
USD 71.10
(Indicative price - actual current price possibly lower)
Rifle Barrel Tools US Specs & Supply
US gunsmith supply: Surefire bore rods are intended to check concentricity prior to firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any issue of alignment, if present. Recommended to verify barrel to adapter to suppressor alignment, for any new build or any previously un-shot setup. Choose the corresponding rod for your caliber rifle or carbine. Precision machined rods for most accurate verification for validation of set-up prior to first round fired specific caliber rods for the most popular options on the market today simply insert the surefire bore rod through the mounted suppressor of an unloaded weapon. Equal space mfg: surefire. Find here reliable & durable gunsmith supplies including rifle barrel tools by Surefire. US supply MPN: SFROD65. Surefire bore alignment rod 6.5mm. Distributor SKU: 152000189-152000188-11263.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Fnh 16s/17s Armorer's Tools 16s 5.56x45mm Barrel Straightness Gauge US Specs & Supply
USD 19.99
(Indicative price - actual current price possibly lower)
Rifle Barrel Tools US Specs & Supply
US gunsmith supply: Fnh 16s & 17s armorer's tools allow for barrel changes, bolt work, and trigger installation to be performed properly tools include: 16s & 17s barrel straightness gauges, ejector removal tool, ejector installation tool, and trigger module mounting axis the barrel straightness gauges ensure proper alignment of the barrel with the receiver when reinstalling 16s or 17s barrels the ejector removal tool allows for 16s and 17s ejectors to be easily removed from the bolt body the ejector installation tool allows for 16s and 17s ejectors to be reinstalled with ease the 16s & 17s trigger module mounting axis ensures that the trigger module is inst mfg: brownells specs: black oxide finish. 16s and 17s barrel straightness gauges heat treated to rc 45-50. Machined from a2 tool steel. 16s/17s ejector removal tool and installation tool heat treated to rc 30-35. Machined from 4140 steel. 16s/17s trigger module mounting axis, heat treated to r. Find here reliable & durable gunsmith supplies including rifle barrel tools by Brownells. US supply MPN: 080-000-978. Brownells fnh 16s/17s armorer's tools 16s 5.56x45mm barrel straightness gauge. Distributor SKU: 080000978-080000978-11263.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Ar 15/M4 Super Reaction Rod US Specs & Supply
USD 175.00
(Indicative price - actual current price possibly lower)
Rifle Barrel Tools US Specs & Supply
US gunsmith supply: The super reaction rod was designed to fulfill the need of an advanced armorer who frequently works on ar-15/m4 platforms with over torqued, seized or loctited barrel nuts. The super reaction rod works by pre-loading the barrel extension lugs to the lugs of the super reaction rod to eliminate movement created by adding torque to the barrel nut while at the same time fixing the upper receiver in place. Having the barrel extension mated t..O the super reaction rod lugs and fixing the upper receiver before torqueing will remove stress that could be placed on the index pin. This allows the armorer to place tremendous torque on the barrel nut to assist in breaking seized nuts loose. The super mfg: geissele automatics llc. Find here reliable & durable gunsmith supplies including rifle barrel tools by Geissele. US supply MPN: 15193. Geissele automatics ar 15/m4 super reaction rod. Distributor SKU: 100016577-100016577-11263.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Fnh 16s/17s Armorer's Tools 16s/17s Ejector Removal Tool US Specs & Supply
USD 19.99
(Indicative price - actual current price possibly lower)
Rifle Barrel Tools US Specs & Supply
US gunsmith supply: Fnh 16s & 17s armorer's tools allow for barrel changes, bolt work, and trigger installation to be performed properly tools include: 16s & 17s barrel straightness gauges, ejector removal tool, ejector installation tool, and trigger module mounting axis the barrel straightness gauges ensure proper alignment of the barrel with the receiver when reinstalling 16s or 17s barrels the ejector removal tool allows for 16s and 17s ejectors to be easily removed from the bolt body the ejector installation tool allows for 16s and 17s ejectors to be reinstalled with ease the 16s & 17s trigger module mounting axis ensures that the trigger module is inst mfg: brownells specs: black oxide finish. 16s and 17s barrel straightness gauges heat treated to rc 45-50. Machined from a2 tool steel. 16s/17s ejector removal tool and installation tool heat treated to rc 30-35. Machined from 4140 steel. 16s/17s trigger module mounting axis, heat treated to r. Find here reliable & durable gunsmith supplies including rifle barrel tools by Brownells. US supply MPN: 080-000-980. Brownells fnh 16s/17s armorer's tools 16s/17s ejector removal tool. Distributor SKU: 080000980-080000978-11263.
More Details : click here
SEARCH this site : click here
|
|
|
Blackhawk Industries Universal Blackhawk Suppressor Tool US Specs & Supply
USD 16.99
(Indicative price - actual current price possibly lower)
Rifle Barrel Tools US Specs & Supply
US gunsmith supply: The blackhawk universal suppressor tool is the same wrench that ships with every blackhawk suppressor. The blackhawk universal suppressor tool is the ideal tool for disassembling and reassembling blackhawk suppressors as needed. Fits all blackhawk suppressors machined steel, in the white compact, easy to carry with you have an extra blackhawk universal suppressor tool lets you keep one on your bench and carry a spare for your range bag, so you're always equipped to adjust, install, or remove your rifle's suppressor. Mfg: blackhawk industries. Find here reliable & durable gunsmith supplies including rifle barrel tools by Blackhawk. US supply MPN: 72SAUT01. Blackhawk industries universal blackhawk suppressor tool. Distributor SKU: 100500288-100500288-11263.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Fnh 16s/17s Armorer's Tools 16s/17s Trigger Module Mounting Axis US Specs & Supply
USD 4.99
(Indicative price - actual current price possibly lower)
Rifle Barrel Tools US Specs & Supply
US gunsmith supply: Fnh 16s & 17s armorer's tools allow for barrel changes, bolt work, and trigger installation to be performed properly tools include: 16s & 17s barrel straightness gauges, ejector removal tool, ejector installation tool, and trigger module mounting axis the barrel straightness gauges ensure proper alignment of the barrel with the receiver when reinstalling 16s or 17s barrels the ejector removal tool allows for 16s and 17s ejectors to be easily removed from the bolt body the ejector installation tool allows for 16s and 17s ejectors to be reinstalled with ease the 16s & 17s trigger module mounting axis ensures that the trigger module is inst mfg: brownells specs: black oxide finish. 16s and 17s barrel straightness gauges heat treated to rc 45-50. Machined from a2 tool steel. 16s/17s ejector removal tool and installation tool heat treated to rc 30-35. Machined from 4140 steel. 16s/17s trigger module mounting axis, heat treated to r. Find here reliable & durable gunsmith supplies including rifle barrel tools by Brownells. US supply MPN: 080-000-982. Brownells fnh 16s/17s armorer's tools 16s/17s trigger module mounting axis. Distributor SKU: 080000982-080000978-11263.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Tangodown Armorer's Blocks Scar Upper Receiver/Barrel Vise Block US Specs & Supply
|
 Copyright © USAGunsmith.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
