Gun Optics Mount Sets US Specs & Supply
|
|
|
 Nikon Ar 15/M16 M 223 Scope Mount M 223 Xr Mount 20 Moa Slope US Specs & Supply
USD 99.95
(Indicative price - actual current price possibly lower)
US gunsmith supply: The nikon p-series scope mount offers ar-15 owners a wide range of flexibility in their optics mounting, enabling them to select two different mounting points for front and rear rings, unlike one-piece optics mounts. The nikon p-series scope mount uses a two-piece reversible design, which allows for use with a wide range of optics. The mounts can also be positioned at different points on the rail for added flexibility. Features flat-dark earth finish or black finish height: 1.4 inches fits 1-inch diameter tubes designed for use with picatinny rails the nikon p-series scope mount also allows the charging handle on ar rifles to remain accessible. Mfg: nikon specs: aluminum, hardcoat anodized, matte black (mb), realtree max-1 (max) or mossy oak brush (brush) camouflage. Steel mounting hardware, black oxide finish. 5" (12.7cm) o.A.L. 3ß½" (8.9cm) center-to-center ring spacing; 3.125" (8cm) between ring edges. Requir. Find here reliable & durable gunsmith supplies including gun optics mount sets by Nikon. US supply MPN: 833. Nikon ar 15/m16 m 223 scope mount m 223 xr mount 20 moa slope. Distributor SKU: 100011750-100011750-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Trg Tikka T3x Direct Isms Mount 34mm Isms Direct Mount 121mm Mounting Length 44.4 Moa US Specs & Supply
USD 410.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a single billet of aluminum. Features direct mounting to trg integral scope rails. Will fit the tikka t3x without modifications. Older style t3's may require slight modifications to the ejection port (opening it approx. 1/10" downwards). M mfg: spuhr. Find here reliable & durable gunsmith supplies including gun optics mount sets by Spuhr. US supply MPN: ST4801. Spuhr trg tikka t3x direct isms mount 34mm isms direct mount 121mm mounting length 44.4 moa. Distributor SKU: 100018301-100018299-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 6 Ims 34mm Mount 34mm Right Hand Matte Black US Specs & Supply
USD 278.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: The leupold mark 6 ims 34mm mount offers a simple and durable solution for mounting a 34mm optic on your favorite ar rifle. Made from sturdy bar stock, these bases will fit perfectly and can withstand years of hard use. Integral rings and bases mount directly to your mil-spec 1913/picatinny rail eliminates the need to add risers or use short eye relief optics mark one location on the rail before removal and you can instantly return to zero serious ar shooters demand products like the leupold mark 6 ims 34mm mount because the integral design provides the most durable platform yet it can be removed quickly and easily as needed. Plus, this product is backed by leupo mfg: leupold. Find here reliable & durable gunsmith supplies including gun optics mount sets by Leupold. US supply MPN: 120303. Leupold mark 6 ims 34mm mount 34mm right hand matte black. Distributor SKU: 526000700-526000700-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Accuracy International Isms Direct Mounts 34mm 1.378" 31 Moa Unimount US Specs & Supply
USD 410.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: This version of the spuhr isms scope mount attaches directly to the scope rails on accuracy international rifle chassis systems, no need for drilling, tapping, or separate rings-and-base. The ideal scope mount system is a revolutionary scope mount with multiple attachment points for accessories like red dot sights, angle / cosine indicators, and other add-ons needed by precision rifle shooters. The built-in level helps prevent you from canting the rifle and compromising accuracy. The entire isms is machined from a single piece of aluminum billet, ensuring it will not flex under heavy recoil. This sturdiness protects the scope from slipping out of alignment under recoil or, worse, be mfg: spuhr. Find here reliable & durable gunsmith supplies including gun optics mount sets by Spuhr. US supply MPN: SA4901. Spuhr accuracy international isms direct mounts 34mm 1.378" 31 moa unimount. Distributor SKU: 100028982-100018261-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 35mm Isms Mount 139mm Mounting Length 20.6 Moa US Specs & Supply
USD 410.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. Find here reliable & durable gunsmith supplies including gun optics mount sets by Spuhr. US supply MPN: SP5601. Spuhr isms picatinny mounts 35mm isms mount 139mm mounting length 20.6 moa. Distributor SKU: 100018286-100011207-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 147mm Mounting Length 0 Moa US Specs & Supply
USD 410.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. Find here reliable & durable gunsmith supplies including gun optics mount sets by Spuhr. US supply MPN: SP4003B. Spuhr isms picatinny mounts 34mm isms mount 147mm mounting length 0 moa. Distributor SKU: 100018278-100011207-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Ar Pepr Permanent Mounts 30mm Ar Pepr Mount US Specs & Supply
USD 89.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: One-piece cantilever mount with integral rings positions the optic almost 2" farther forward to provide extra clearance needed for a night vision device (nvd), add-on magnifier, or long eye relief scope. The "proper eye position ready" mount also features built-in, two-slot rails on the tops of the rings for convenient mounting of reflex sights or other accessories. Each top ring strap is secured with six torx screws to prevent recoil-induced slippage. Side locking bar with two, steel hex nuts and cross-bolts hold tight on any picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Mfg: burris specs: aluminum, hardcoat anodized, matte black. 5.3" (13.5cm) long, 1.6" (4.1cm) wide, 2.4" (6.1cm) overall height. Height from top of rail to bottom of ring: 1" (2.5cm). 8.7 oz. (247g) weight. Fits scopes with 1" tube. Mounts to mil-std 1913 picatinny rails. Find here reliable & durable gunsmith supplies including gun optics mount sets by Burris. US supply MPN: 410341. Burris ar pepr permanent mounts 30mm ar pepr mount. Distributor SKU: 749101260-118000028-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Wilson Combat Ar 15/M16 Accu Rizer Flattop Scope Mount Accu Rizer Scope Mount 30mm US Specs & Supply
USD 159.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: One-piece riser mount with integral rings provides additional elevation from top of rail to centerline of ring to ensure a proper cheek weld. Precision machined from aluminum bar stock for a secure fit on flattop receiver rail. Scope and mount form a single unit for fast attachment and removal without loss of zero. Mounts by hand tightening the oversized thumb screw to clamp the locking plate. The captive, spring-loaded locking plate maintains a positive mechanical connection that resists loosening under shock and vibration. Four hardened torx-head screws clamp each ring cap to the lower half. Models available for scopes with 1" or 30mm diameter bodies. 1" and 30mm model&rsquo mfg: wilson combat specs: aluminum, hardcoat anodized, black. Approx. 5" (12.7cm) long, 17⁄8" (4.8cm) wide. Approx. 8 oz. (227g) weight. 1", height from top of base to inside bottom of ring: 1.2" (30.5mm). 30mm, height from top of base to inside bottom of ring: 1" (2.5mm). Find here reliable & durable gunsmith supplies including gun optics mount sets by Wilson. US supply MPN: TRARMOUNT30. Wilson combat ar 15/m16 accu rizer flattop scope mount accu rizer scope mount 30mm. Distributor SKU: 965000104-965000087-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Marlin 336/1895 1" Low Scope Mount US Specs & Supply
USD 46.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. Find here reliable & durable gunsmith supplies including gun optics mount sets by Talley. US supply MPN: 930336. Talley light weight scope mount marlin 336/1895 1" low scope mount. Distributor SKU: 874000039-874000025-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Gg&G Ac 30 Accucam Quick Detach Scope Mount Ac 30 Accucam Qd Base With 30mm Integral Rings US Specs & Supply
USD 205.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: In order to provide the shooter with the ability to gain more eye relief, gg&g has introduced the ac-30 accucam qd mounting base with integral 30mm scope rings. This mounting base is tall enough to provide clearance for the latest large objective lens-long range optics. The integrated accucam quick detach lever system provides the shooter with the ability to quickly remove the scope in order to utilize other optics as the mission may require, and have the confidence of 1/2 moa repeatability upon reinstallation. The overall length of the ac-30 accucam qd scope mounting base is five inches. The mounting base portion is four inches in length and with its skeletonized construction wei mfg: gg&g, inc. Find here reliable & durable gunsmith supplies including gun optics mount sets by GG&G. US supply MPN: GGG1238. Gg&g ac 30 accucam quick detach scope mount ac 30 accucam qd base with 30mm integral rings. Distributor SKU: 336000054-336000054-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Mro 45 Degree Mount US Specs & Supply
USD 134.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Slim enough to fit under most magnified optics, the zrodelta dloc-mro 45 degree mount offset adaptor lets you quickly switch from your primary optic to the mro sight- with just a twist of your rifle! three recoil lugs and six engagement points means the dloc system grabs on to your rail with an alligator like bite that won't rattle loose under heavy recoil or rough use in the field. Heavy duty springs in the side bar clamp down the instant you drop the mount on the rail, then add the final tightening with the convenient adjustment knob. Mount ensures optic retains true zero when you take it off and remount it on your rifle. Fits the trijicon mro mount fits r mfg: zro delta. Find here reliable & durable gunsmith supplies including gun optics mount sets by ZRO Delta. US supply MPN: 7.023E+11. Zro delta dloc mro 45 degree mount. Distributor SKU: 100029456-100029456-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance One Piece Scope Mounts 30mm Unimount Extra High (1.3"x4.65") 20 Moa Aluminum US Specs & Supply
USD 189.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: These one-piece scope mounts from badger ordnance provide a rock-solid mount for scopes with 34mm tubes. Their monolithic construction withstands harsh recoil, and makes for easy mounting onto any picatinny receiver rail. Available in two heights, both measured from bottom of mount to center of optic. 1.3" height has built-in 20 moa elevation. 1.49" height has no moa. Rings secure with 4 torx head screws each. Reducer rings, available separately, allow use on 30mm scope tubes. Includes installation wrench. Mfg: badger ordnance . Find here reliable & durable gunsmith supplies including gun optics mount sets by Badger. US supply MPN: 30696. Badger ordnance one piece scope mounts 30mm unimount extra high (1.3"x4.65") 20 moa aluminum. Distributor SKU: 093000090-093000048-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Bkl Technologies 200 Seroes 1" Scope Rings 1" Offset Dovetail Rings Silver US Specs & Supply
USD 35.95
(Indicative price - actual current price possibly lower)
US gunsmith supply: Aircraft-grade aluminum scope rings feature self-adjusting clamping legs that fit 3⁄8" or european 11mm dovetail mounts found on many bolt-action rimfire rifles. Each leg moves equally as the clamping screws are tightened to keep the scope centered on the rail. Clamping screws also fit into pre-drilled holes to equally spread the legs to easily slip over oversized rails. 200 series fits 1" scopes and 300 series fits 30mm scopes. Available as a one-piece cantilever mount with a 2.4" offset, a pair of scope rings, or as a pair of one standard and one offset ring with a 1.3" offset. Ring pairs available as either single, or double top strap. Single-strap rings measure mfg: bkl technologies. Find here reliable & durable gunsmith supplies including gun optics mount sets by BKL. US supply MPN: BKL274S. Bkl technologies 200 seroes 1" scope rings 1" offset dovetail rings silver. Distributor SKU: 749012572-749012560-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Ruger 10/22 1" Low Scope Mount US Specs & Supply
USD 46.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. Find here reliable & durable gunsmith supplies including gun optics mount sets by Talley. US supply MPN: 930707. Talley light weight scope mount ruger 10/22 1" low scope mount. Distributor SKU: 874000049-874000025-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Red Dot Interface Mounts Burris Fastfire/Doctor Isms Interface US Specs & Supply
USD 63.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The "ideal scope mount system" have interface surfaces directly on the mount, making it possible to mount accessories either by picatinny rails or as direct interfaces. Direct interfaces allow you to mount a red dot sight directly to your spuhr mounts or rings. Mfg: spuhr. Find here reliable & durable gunsmith supplies including gun optics mount sets by Spuhr. US supply MPN: A0011. Spuhr isms red dot interface mounts burris fastfire/doctor isms interface. Distributor SKU: 100018259-100018257-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm 1.102" 0 Moa Unimount US Specs & Supply
USD 410.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. Find here reliable & durable gunsmith supplies including gun optics mount sets by Spuhr. US supply MPN: SP4011. Spuhr isms picatinny mounts 34mm 1.102" 0 moa unimount. Distributor SKU: 100028969-100011207-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Rs Regulate Ak47/Akm Optic Mount System Akml Aimpoint Micro Upper Mount US Specs & Supply
USD 65.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: Updated design allows for customization of the mounting platform. Option of three different lower mounts, with a full length lower rail, forward rail and rear rail. Placement of lower rail allows for optics to be positioned in the ideal location front to back, as well as right to left. Lightweight cnc machined aircraft grade 6061 t6 aluminum. Position optics in co-witness location. Allows field stripping of the rifle without removal of the optic on most ak variants. Redesigned thumb lever lock retains zero even after repeated optic removal and reinstallation. Ability to stake position for extreme duty. Akml allows the mounting of the aimpoint t-1 and h-1 micro red dot optics mfg: rs regulate specs: 6061 t6 aluminum, matte black teflon coated finish. Accepts optics with 30mm od tube. Fits ak and akm rifles equipped with receiver side mount base dovetail. Base not included. Find here reliable & durable gunsmith supplies including gun optics mount sets by RS. US supply MPN: AKML. Rs regulate ak47/akm optic mount system akml aimpoint micro upper mount. Distributor SKU: 100011560-100011181-21280.
More Details : click here
SEARCH this site : click here
|
|
|
American Defense Manufacturing Recon H Quick Detach Scope Mounts Recon 34mm High Scope Mount 2" Offset US Specs & Supply
USD 186.49
(Indicative price - actual current price possibly lower)
US gunsmith supply: Ne-piece integral base and rings with dual-lever system provides a quick attach/detach platform for mounting optics onto flattop-style ar-15s. Extra-high cantilever mount positions optics 2" forward, allowing you to get the eye relief you need. Precision machined from 6061 t6 aluminum and finished in hard coar t3 mil-spec anodize. Features adm's patented qd auto lock lever system to accommodate both in spec and out of spec rail systems. Mfg: american defense manufacturing specs: 6061-t6 aluminum, t3 mil-spec anodized, matte black. 8 oz (226g) wt. (all models). Heights measured from top of rail to centerline of scope tube. Ad-recon-h 6" (15.2cm) oal. 1" and 30mm model 1-7⁄8" (4.7cm) height. 2ß½" (6.3cm ) space bet. Find here reliable & durable gunsmith supplies including gun optics mount sets by American Defense. US supply MPN: ADRECONH34STD. American defense manufacturing recon h quick detach scope mounts recon 34mm high scope mount 2" offset. Distributor SKU: 100017131-100005761-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Aero Precision Ultralight Spr Scope Mounts Ultralight 30mm Spr Scope Mount Black US Specs & Supply
USD 69.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Featuring a rigid, lightweight design, aero precisions ultralight spr (special project rifle) scope mounts complements many high-end optic platforms. These scope mounts are designed to fit mil-spec 1913 picatinny rails with a cross-slot keyway that offers excellent recoil protection. These ultralight scope mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 2" for better eye relief designed for ar type upper receivers 6061 t6 extruded aluminum construction rigid and lightweight weight: 3.36oz mfg: aero precision. Find here reliable & durable gunsmith supplies including gun optics mount sets by Aero Precision. US supply MPN: APRA210600. Aero precision ultralight spr scope mounts ultralight 30mm spr scope mount black. Distributor SKU: 953000013-953000013-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Kinetic Development Group Sidelok 34mm Modular Optic Mount 34mm Sidelok Modular Optic Mount US Specs & Supply
USD 209.24
(Indicative price - actual current price possibly lower)
US gunsmith supply: Kdg's 34mm sidelok modular optic mount provides user-configurable options that made it one of the most versatile qd scope mounts available. Of course, you can quickly clamp it to any picatinny receiver rail, then remove it just as fast, with one hand, simply by pressing the release button at the front. The sidelok optic mount's innovative locking system makes it virtually impossible to unintentionally release the mount. Cam lock system ensures the sidelok will fit all picatinny rails, even those that are out of spec. The rings on the sidelok modular optic mount can moved forward or backward to avoid interference with objective bells, turret knobs, or magnification adjustm mfg: kinetic development group llc. Find here reliable & durable gunsmith supplies including gun optics mount sets by Kinetic. US supply MPN: SID5141. Kinetic development group sidelok 34mm modular optic mount 34mm sidelok modular optic mount. Distributor SKU: 100025961-100025961-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 35mm Isms Mount 139mm Mounting Length 0 Moa Type SP5002SHORT US Specs & Supply
USD 410.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. Find here reliable & durable gunsmith supplies including gun optics mount sets by Spuhr. US supply MPN: SP5002SHORT. Spuhr isms picatinny mounts 35mm isms mount 139mm mounting length 0 moa type sp5002short. Distributor SKU: 100018291-100011207-21280.
More Details : click here
SEARCH this site : click here
|
|
|
American Defense Manufacturing Recon Sl Bolt Action Scope Mounts Recon 30mm Bolt Action Mount US Specs & Supply
USD 159.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Similar to the ad-recon-s, the ad-recon-sl mount is made for putting high power glass onto a bolt action rifle. This is the lowest mount that amd offers. The ad-recon-sl is a straight up scope mount with no eye relief built in. It is precision machined from 6061 t6 aluminum and finished in hard coat t3 mil-spec anodize. It features the patented qd auto lock lever system to accommodate both in spec and out of spec rail systems. Mfg: american defense manufacturing. Find here reliable & durable gunsmith supplies including gun optics mount sets by American Defense. US supply MPN: ADRECONSL30ST. American defense manufacturing recon sl bolt action scope mounts recon 30mm bolt action mount. Distributor SKU: 100017134-100017133-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Ar 15/M16 R.A.M.P. Tactical Mount Tactical R.A.M.P Mount 1 Inch Green US Specs & Supply
USD 161.49
(Indicative price - actual current price possibly lower)
US gunsmith supply: The rapid acquisition multisight platform (r.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable mil-std 1913 picatinny rails on the left and right sides that let you mount secondary sights 45 off-axis from the main optic. Each top ring strap is secured with four torx screws for recoil-proof holding power. Two large hex nuts and 3" long steel clamping bar lock the mount to a picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model mfg: warne mfg. Company specs: 6061 t6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23⁄8" (6cm) wide, 2βό" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) wei. Find here reliable & durable gunsmith supplies including gun optics mount sets by Warne. US supply MPN: RAMP1Z. Warne mfg. company ar 15/m16 r.a.m.p. tactical mount tactical r.a.m.p mount 1 inch green. Distributor SKU: 947000316-947000263-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Acog Optic Mount US Specs & Supply
USD 130.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Easily remove and reattach your acog with assured return to zero every time when you have the zrodelta's dloc-acog mount. With 10 solid engagement points and 3 recoil lugs, the dloc-acog grabs your rifle's receiver rail and hangs on like an angry pit bull. Thanks to heavy-duty springs on the side locking bar, one-handed installation is also a cinch: loosen the screw knob, snap the mount on your rail, then just finger-tighten the dloc-acog's knob to lock it in place so it won't rattle loose. Need to access back up sights or a secondary optic pdq? just loosen the finger nut and remove the mount. Fits all trijicon acogs & acog-style optics using triji mfg: zro delta. Find here reliable & durable gunsmith supplies including gun optics mount sets by ZRO Delta. US supply MPN: 7.023E+11. Zro delta dloc acog optic mount. Distributor SKU: 100029439-100029439-21280.
More Details : click here
SEARCH this site : click here
|
|
|
Kinetic Development Group Sidelok 1" Modular Optic Mount 1" Sidelok Modular Optic Mount US Specs & Supply
USD 209.24
(Indicative price - actual current price possibly lower)
US gunsmith supply: Kdg's 1" sidelok modular optic mount provides user-configurable options that made it one of the most versatile qd scope mounts available. Of course, you can quickly clamp it to any picatinny receiver rail, then remove it just as fast, with one hand, simply by pressing the release button at the front. The sidelok optic mount's innovative locking system makes it virtually impossible to unintentionally release the mount. Cam lock system ensures the sidelok will fit all picatinny rails, even those that are out of spec. The rings on the sidelok modular optic mount can moved forward or backward to avoid interference with objective bells, turret knobs, or magnification adju mfg: kinetic development group llc. Find here reliable & durable gunsmith supplies including gun optics mount sets by Kinetic. US supply MPN: SID5142. Kinetic development group sidelok 1" modular optic mount 1" sidelok modular optic mount. Distributor SKU: 100025962-100025962-21280.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gun Optics Mount Sets US Specs & Supply
|
 Copyright © USAGunsmith.com : 1997 - 2025 : All rights reserved. 140-UNI
|
|
