Gun Electronic Sight Mounting Hardware US Specs & Supply
|
|
|
 Samson Manufacturing Corp Quick Flip Mounts Quick Flip N/Seas Night Vision Mount US Specs & Supply
USD 236.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: 6061 t6 aluminum construction cnc machined hard coat anodized finish lightweight easy to install fits 1913 rail no permanent modifications to firearm for installation flips night vision device to side can be used with helmet mount low profile mounting a night vision device on your rifle is a two edged sword. You can see in low light, but the darn thing is in your way most of the time. Your answer is the samson quick flip mounts. This allows you to flip the nvd to the side and out of the way until needed. The quick flip mounts are cnc machined of 6061 t6 aluminum with a hard coat anodized finish. It is a lightweight mount that mfg: samson manufacturing corp specs: made from 6061 t6 aluminum, cnc machined, hard coat anodized finish, lightweight, easy to install, fits 1913 rail, no permanent modification to firearm for installation, attaches with arms throw lever. Qf-nvd, flips nvd to side, nvd dismounts instantly, can be used with helmet mount, low. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Samson. US supply MPN: QFNSEAS. Samson manufacturing corp quick flip mounts quick flip n/seas night vision mount. Distributor SKU: 100006280-100006279-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Precision Reflex Rmr Sight Scope Mount US Specs & Supply
USD 39.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Machined aluminum mount lets you install a trijicon rmr reflex sight on a 30mm scope tube. Enables fast transition from long-range to close-in targeting simply by moving your eye. Lets you position the rmr to the left, right, or at any angle in between. Can also replace the ring top half on precision reflex 30mm scope rings. Mfg: precision reflex, inc. Specs: 6061 t6 aluminum, hardcoat anodized, black. 1ß?" (4.4cm) long, 17⁄8" (4.7cm) wide, 1βύ" (4.4cm) high. 2 oz. (57g) wt. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Precision. US supply MPN: 903001. Precision reflex rmr sight scope mount. Distributor SKU: 714000018-714000018-10128.
More Details : click here
SEARCH this site : click here
|
|
|
A.R.M.S. Inc Trijicon Reflex Mount Trijicon Reflex Throw Lever Channel Mount US Specs & Supply
USD 130.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: The a.R.M.S. #15 trijicon reflex sight mount features an ultra-low profile mounting platform designed for the trijicon reflex sight. A combination of the repeat zero and throw lever system provide a built in streamline appearance for optimum fast action accuracy. This platform attaches to the bottom of the sight by 3 included screws and provides 2 positive locking throw levers which feature the a.R.M.S. No-mar buffer pads. No gunsmithing is required for this platform and it meets or exceeds all mil-spec requirements. Mfg: a.R.M.S.,inc specs: weight: 3.3 oz, length: 4.2-inches, height: .25-inches. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by ARMS. US supply MPN: 15. A.r.m.s. inc trijicon reflex mount trijicon reflex throw lever channel mount. Distributor SKU: 100004858-100004858-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Egw Optima/Jpoint Handgun Mounts Optima/Jp Mount Blank US Specs & Supply
USD 46.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Egw optima/jpoint/delta point mount. Simply remove the rear sight on your gun and replace it with the egw mount in order to mount your optima, j-point or delta point red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Mfg: egw. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by EGW. US supply MPN: 49422. Egw optima/jpoint handgun mounts optima/jp mount blank. Distributor SKU: 296000338-296000338-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Benelli M2 Montefeltro Speed Bead Mount Benelli M2 Montefeltro Ultra Light US Specs & Supply
USD 79.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The unique benelli m2, montefeltro and ultra light speedbead mount makes it easy to add a fastfire red dot sight to your shotgun. It's ideal for clays and for hunting waterfowl, upland birds, and turkeys. All speedbead mounts are compatible with all fastfire red dot sight models mounts the optic between the stock and receiver with 2 screws low mounting system means your line of sight falls just above the vented rib allows for accurate and instinctive aiming mfg: burris. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Burris. US supply MPN: 410672. Burris benelli m2 montefeltro speed bead mount benelli m2 montefeltro ultra light. Distributor SKU: 118000226-118000226-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Samson Manufacturing Corp Quick Flip Mounts ing Plate M4 US Specs & Supply
USD 17.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: 6061 t6 aluminum construction cnc machined hard coat anodized finish lightweight easy to install fits 1913 rail no permanent modifications to firearm for installation flips night vision device to side can be used with helmet mount low profile mounting a night vision device on your rifle is a two edged sword. You can see in low light, but the darn thing is in your way most of the time. Your answer is the samson quick flip mounts. This allows you to flip the nvd to the side and out of the way until needed. The quick flip mounts are cnc machined of 6061 t6 aluminum with a hard coat anodized finish. It is a lightweight mount that mfg: samson manufacturing corp specs: made from 6061 t6 aluminum, cnc machined, hard coat anodized finish, lightweight, easy to install, fits 1913 rail, no permanent modification to firearm for installation, attaches with arms throw lever. Qf-nvd, flips nvd to side, nvd dismounts instantly, can be used with helmet mount, low. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Samson. US supply MPN: QFMPL. Samson manufacturing corp quick flip mounts ing plate m4. Distributor SKU: 100006287-100006279-10128.
More Details : click here
SEARCH this site : click here
|
|
|
A.R.M.S. Inc Single Throw Lever Mounts Single Throw Lever Tri Lock Platform Mount US Specs & Supply
USD 79.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: The a.R.M.S. #17 single lever tri-lock mount was manufactured as the ideal mount for small pocket scopes, flashlights, and various laser attachments. It offers an ultra-low design to maintain a compact profile. It features 2 solid attachment feet on the right side which are firmly held in place with a steel locking foot and lever on the left side. A standard stanag width channel allows secure laser or n.V. Optic attachment. It also offers a repeat zero hold with an easy on/off design. Mfg: a.R.M.S.,inc specs: tri-lock mount, finish: non-reflective black, low profile design. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by ARMS. US supply MPN: 17. A.r.m.s. inc single throw lever mounts single throw lever tri lock platform mount. Distributor SKU: 100004862-100004862-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Fastfire Scope Tube Mounts Scope Tube Fastfire Mount 34mm US Specs & Supply
USD 67.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Every tactical operator needs options when it comes to mounting accessories. Now you can position a fastfire secondary optic in nearly any radial position on your primary optic. The scope tube fastfire mount allows your primary optic to remain on a higher magnification while quickly switching to the fastfire sight for ultra-fast close quarters target engagement. It's also great for long-range target acquisition and weapon alignment to then be engaged with your high power primary optic. Mfg: burris. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Burris. US supply MPN: 410339. Burris fastfire scope tube mounts scope tube fastfire mount 34mm. Distributor SKU: 118000126-118000124-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Trijicon Rm44 Mount For Glock Pistol US Specs & Supply
USD 87.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Strong, lightweight aluminum mounts provide a secure, solid platform for trijicon's rmr red dot sights. Steel rm44 allows an rmr to be mounted on glock pistols in place of the rear sight. Mount behind your primary optic for fast transition from a magnified view to close-in sighting by rotating the rifle slightly. Locking bar and easy-to-grasp grooved thumbscrew ensure fast attachment. Glock mos slides are not included. Mfg: trijicon specs: aluminum, hardcoat anodized matte black. Heights measured from top of rail to bottom of sight. Fits picatinny rails. Rm44, steel, oxide coated, matte black. 9/64" (3.6mm) high. Glock mos slides are not included. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Trijicon. US supply MPN: AC32012. Trijicon rm44 mount for glock pistol. Distributor SKU: 892000084-892000084-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Battle Arms Development Lightweight Trijicon Mro Optic Mount Trijicon Mro Lower Third Co Witness Mount Matte Black US Specs & Supply
USD 69.95
(Indicative price - actual current price possibly lower)
US gunsmith supply: Precision cnc machined from billet 7075-t6 aluminum, the battle arms lightweight mro optic mount is one of the lightest on the market, weighing in at only 0.88 ounces. Available with an absolute cowitness or a lower third cowitness, the bad-lom's rugged one piece design is simply rocked onto your rail, tightened down, and ready to go. Hardcoat anodized matte black finish machined from billet 7075-t6 aluminum weight: 0.88 ounces it's recommended that a torque wrench be used for installation to prevent over torqueing. Mfg: battle arms development inc. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Battle. US supply MPN: BADLOMMRO13B. Battle arms development lightweight trijicon mro optic mount trijicon mro lower third co witness mount matte black. Distributor SKU: 100018967-100020439-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Aimtech Handgun Scope Mount Glock (W/Accessory Rail) Scope Mount US Specs & Supply
USD 67.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Installs quickly to let you add scope capabilities to semi-auto handguns. Issue sights remain fully functional. Mounts clamp to top strap and right side of frame. Includes longer sideplate screws. Accepts weaver-style rings. Mfg: aimtech specs: machined 6061 t6 aluminum, black anodized finish. 5" long (12.7cm), 1" wide (2.5cm), 4 oz. (113 g) wt. Loctite, screws and wrench included. Glock w/acc rail fits 9mm/.40 models only. Hk usp fits 9mm/.40 only. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Aimtech. US supply MPN: APM1R. Aimtech handgun scope mount glock (w/accessory rail) scope mount. Distributor SKU: 017000005-017192001-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Fastfire Mounts Glock 45 Acp/10mm Mount US Specs & Supply
USD 47.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Allows mounting of the burris fastfire ii or iii red dot sight to the dovetail of many popular pistols. Mfg: burris specs: mounts, aluminum, matte black. Mounting screws included. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Burris. US supply MPN: 410319. Burris fastfire mounts glock 45 acp/10mm mount. Distributor SKU: 118000200-118000011-10128.
More Details : click here
SEARCH this site : click here
|
|
|
J P Enterprises J Point Mount S&W M&P Slide Mount Adapter US Specs & Supply
USD 37.95
(Indicative price - actual current price possibly lower)
US gunsmith supply: Gives the j.P. J-point, and the old tasco optima and fire point sights, the lowest possible mount for fast eye alignment and sight pickup. No machining required; fits the factory dovetail. Four locating studs lock sight to base. Bm #1 fits slides cut for "melted-in" sight. S&w revolver fits factory drilled and tapped guns. Sight & shims available for j-point mount. Mfg: j p enterprises specs: aluminum, black anodized, matte finish. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by JP. US supply MPN: JPAMP. J p enterprises j point mount s&w m&p slide mount adapter. Distributor SKU: 452000207-452000002-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Fastfire Mounts Ruger Mark I Ii i Mount US Specs & Supply
USD 47.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Allows mounting of the burris fastfire ii or iii red dot sight to the dovetail of many popular pistols. Mfg: burris specs: mounts, aluminum, matte black. Mounting screws included. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Burris. US supply MPN: 410329. Burris fastfire mounts ruger mark i ii i mount. Distributor SKU: 118000202-118000011-10128.
More Details : click here
SEARCH this site : click here
|
|
|
J P Enterprises J Point Mount Standard 1911 Fixed Slide Plate Adapter US Specs & Supply
USD 37.95
(Indicative price - actual current price possibly lower)
US gunsmith supply: Gives the j.P. J-point, and the old tasco optima and fire point sights, the lowest possible mount for fast eye alignment and sight pickup. No machining required; fits the factory dovetail. Four locating studs lock sight to base. Bm #1 fits slides cut for "melted-in" sight. S&w revolver fits factory drilled and tapped guns. Sight & shims available for j-point mount. Mfg: j p enterprises specs: aluminum, black anodized, matte finish. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by JP. US supply MPN: JPA11. J p enterprises j point mount standard 1911 fixed slide plate adapter. Distributor SKU: 452000018-452000002-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Beretta Xtrema 391 Light Urika Speed Bead Mount Beretta Xtrema/2 391 Light Urika/2 US Specs & Supply
USD 79.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The unique beretta xtrema, xtrema ii, 391, light, urika and urika 2 speedbead mount makes it easy to add a fastfire red dot sight to your shotgun. It's ideal for clays and for hunting waterfowl, upland birds, and turkeys. All speedbead mounts are compatible with all fastfire red dot sight models mounts the optic between the stock and receiver with 2 screws low mounting system means your line of sight falls just above the vented rib allows for accurate and instinctive aiming mfg: burris. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Burris. US supply MPN: 410678. Burris beretta xtrema 391 light urika speed bead mount beretta xtrema/2 391 light urika/2. Distributor SKU: 118000232-118000232-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Bobro Engineering Aimpoint Comp Mr/M4s Mount Aimpoint Compm4/M4s Mount US Specs & Supply
USD 134.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: Bobro designed aimpoint comp m4/m4s mount provides a rock solid, repeat zero scope interface for your weapon platform. It features the patent pending blaclever system which requires no manual adjustment to attain a proper, rock solid engagement on a 1913 picatinny rail.Precision cnc machined from a block of 6061 t6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish. Mfg: bobro engineering. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Bobro. US supply MPN: B02004000. Bobro engineering aimpoint comp mr/m4s mount aimpoint compm4/m4s mount. Distributor SKU: 100203552-100203552-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Sightmark Mini Shot Pistol Mounts Sig Sauer P226 US Specs & Supply
USD 39.97
(Indicative price - actual current price possibly lower)
US gunsmith supply: The mini shot pistol mount offers the ability to mount the mini shot to the pistol, replacing the rear sight holes. This offers the shooter the ability to acquire a target and fire with both eyes open and gives the shooter the tactical advantage of being able to identify additional targets in the process. The pistol mount is easy to use once installed and features a mounting base and dovetail, providing stabilization for the optic ensuring effective shots on target every time. The pistol mount is constructed from aluminum making the unit highly durable and lightweight, able to withstand both the tactical and training environments of tomorrow. Mfg: sightmark. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Sightmark. US supply MPN: SM19032. Sightmark mini shot pistol mounts sig sauer p226. Distributor SKU: 100012417-100012415-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Aimpoint Flip To Side Mounts Flip To Side Magnifier Low Mount US Specs & Supply
USD 332.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The aimpoint flipmount is a quick attach / detach mount that can be quickly flipped in or out of the optical axis. The flipmount is designed primarily for use with aimpoint magnifiers, but can also be used to mount other optical equipment with a 30mm tube. The flipmount is offered in two different heights to accommodate various sight mounts. Mfg: aimpoint. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Aimpoint. US supply MPN: 200250. Aimpoint flip to side mounts flip to side magnifier low mount. Distributor SKU: 100019326-100019326-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Aimpoint Flip To Side Mounts Flip To Side Magnifier High Mount US Specs & Supply
USD 332.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The aimpoint flipmount is a quick attach / detach mount that can be quickly flipped in or out of the optical axis. The flipmount is designed primarily for use with aimpoint magnifiers, but can also be used to mount other optical equipment with a 30mm tube. The flipmount is offered in two different heights to accommodate various sight mounts. Mfg: aimpoint. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Aimpoint. US supply MPN: 200251. Aimpoint flip to side mounts flip to side magnifier high mount. Distributor SKU: 100019327-100019326-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Samson Manufacturing Corp Quick Flip Mounts 30mm Quick Flip Optic Ring US Specs & Supply
USD 203.99
(Indicative price - actual current price possibly lower)
US gunsmith supply: 6061 t6 aluminum construction cnc machined hard coat anodized finish lightweight easy to install fits 1913 rail no permanent modifications to firearm for installation flips night vision device to side can be used with helmet mount low profile mounting a night vision device on your rifle is a two edged sword. You can see in low light, but the darn thing is in your way most of the time. Your answer is the samson quick flip mounts. This allows you to flip the nvd to the side and out of the way until needed. The quick flip mounts are cnc machined of 6061 t6 aluminum with a hard coat anodized finish. It is a lightweight mount that mfg: samson manufacturing corp specs: made from 6061 t6 aluminum, cnc machined, hard coat anodized finish, lightweight, easy to install, fits 1913 rail, no permanent modification to firearm for installation, attaches with arms throw lever. Qf-nvd, flips nvd to side, nvd dismounts instantly, can be used with helmet mount, low. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Samson. US supply MPN: QF30MM. Samson manufacturing corp quick flip mounts 30mm quick flip optic ring. Distributor SKU: 100006284-100006279-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Benelli M2 20 Gauge Speed Bead Mount Benelli M2 20 Ga US Specs & Supply
USD 79.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: The unique benelli m2 20 gauge speedbead mount makes it easy to add a fastfire red dot sight to your shotgun. It's ideal for clays and for hunting waterfowl, upland birds, and turkeys. All speedbead mounts are compatible with all fastfire red dot sight models mounts the optic between the stock and receiver with 2 screws low mounting system means your line of sight falls just above the vented rib allows for accurate and instinctive aiming mfg: burris. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Burris. US supply MPN: 410687. Burris benelli m2 20 gauge speed bead mount benelli m2 20 ga. Distributor SKU: 118000228-118000228-10128.
More Details : click here
SEARCH this site : click here
|
|
|
Scalarworks Trijicon Rmr Ultralight Sync Mount Mossberg Trijicon Rmr Sync Mount US Specs & Supply
USD 119.00
(Indicative price - actual current price possibly lower)
US gunsmith supply: Tough as a tank, yet nowhere near as bulky and extremely lightweight, the scalarworks sync rmr mount is a solid platform for anchoring a trijicon rmr red dot sight firmly to your shotgun's receiver. It's also engineered to sit at the right height for co-witnessing with iron sights. The sync rmr mount attaches to your shotgun using four screws and scalarworks proprietary internal key-slot system. This spreads the recoil force over a larger area to help ensure the rmr doesn't shift. The sync's water-tight mounting platform does not require a sealing plate between it and the battery compartment on the underside of the rmr. Ultra-light, weighs only 0.7 oz mfg: scalarworks. Find here reliable & durable gunsmith supplies including gun electronic sight mounting hardware by Scalarworks. US supply MPN: SW1110. Scalarworks trijicon rmr ultralight sync mount mossberg trijicon rmr sync mount. Distributor SKU: 100029284-100029283-10128.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gun Electronic Sight Mounting Hardware US Specs & Supply
|
 Copyright © USAGunsmith.com : 1997 - 2025 : All rights reserved. 140-UNI
|
|
