Gg&G Bipod Pss Adapter US Specs & Supply
Reliable Shooting Bipod Accessories by GG&G in US specification & supply
|
US gunsmith supply: This low-profile, bolt-on gg&g pss adapter gives you the ability to mount a gg&g standard or heavy duty bipod on a pss rifle or rifle stock that has two sling studs under the forearm. Precision machined from 6061-t6 billet aluminum, the gg&g pss adapter comes with all mounting hardware. Mfg: gg&g, inc. Find here reliable & durable gunsmith supplies including shooting bipod accessories by GG&G. US supply MPN: GGG1246. Gg&g bipod pss adapter. Distributor SKU: 336000079-336000079-10052.
 Indicative Price: USD 37.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more gunsmith equipment, tools, supplies & gun parts : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
E. Arthur Brown Company Knob S Lever For Harris Type Bipods US Specs & Supply
USD 12.99
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: Easy-to-install lever replaces the knob on harris s-series bipods, so you can release the tension, tilt the rifle to level the scope crosshairs, and then with a quick flick of the lever, lock it down so you're ready to fire. Lightweight, fiber-reinforced nylon lever is easy to grasp and spring-loaded so you can reposition it to prevent snags without losing the tilt setting. Installs with simple hand tools. Instructions included. Mfg: e. Arthur brown company, inc. Specs: lever, fiber-filled nylon, black. Hardware carbon steel, blued. Approximately 2" (5cm) long, 13⁄8" (3.5cm) deep, 5⁄8" (1.6cm) wide. .6 oz. (17g) weight. Find here reliable & durable gunsmith supplies including shooting bipod accessories by E. Arthur Brown. US supply MPN: 127920. E. arthur brown company knob s lever for harris type bipods. Distributor SKU: 419000001-419000001-10052.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul M Lok Tripod Adapter US Specs & Supply
USD 47.45
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: The m-lok tripod adapter for metal m-lok compatible hand guards or forends mounts directly onto any tripod head equipped with the common manfrotto rc2/q2 interface. This adapter allows the user to mount their rifle directly to a tripod head without the use of any additional saddles giving them a secure shooting platform. The m-lok tripod adapter is machined from aluminum and finished in mil-spec anodizing which offers excellent corrosion resistance. The beveled ends and corners produce a minimal footprint allowing the user to keep the m-lok tripod adapter attached to the weapon system at all times with minimal snagging hazards. This adapter is part of the ever growing m-lok product line f mfg: magpul. Find here reliable & durable gunsmith supplies including shooting bipod accessories by Magpul. US supply MPN: MAG624BLK. Magpul m lok tripod adapter. Distributor SKU: 100017973-100017973-10052.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc A Rail Adapter US Specs & Supply
USD 116.99
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: The compact dloc-a rail adapter from zrodelta adds an additional 1/2" of elevation to the receiver or forend rail, making it perfect attaching lasers, flashlights, sling mounts, or other essential accessories. The patented dloc qd clamping system sports ten different engagement points, plus three recoil lugs, ensuring it locks onto the rail and stays in place with rock solid reliability. Clamps securely to any mil-std 1913 picatinny rail designed to allow for quick detachment/attachment precision machined one piece body provides three picatinny cross-slots heavy duty springs on the zrodelta's dloc-a rail adapter cross bar hold the riser in place mfg: zro delta. Find here reliable & durable gunsmith supplies including shooting bipod accessories by ZRO Delta. US supply MPN: 7.029E+11. Zro delta dloc a rail adapter. Distributor SKU: 100029450-100029450-10052.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc S Mounting System Kit For Harris S Style Bipod Dloc S Harris S Style Bipod Mount US Specs & Supply
USD 134.99
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: Give your harris-s style bipod the ability to cant your rifle left and right for improved targeting, especially in uneven terrain, using the zrodelta dloc-s upgrade kit. For greater adjustability, the sarg knob (shooter adjustable rotary grip) lets you tweak the bipod's canting tension for even more precise targeting. The dloc-s also converts your bipod's static mounting system to a quick disconnect mount, so you can use the same bipod on multiple rifles. Quick detach with one hand heavy duty springs for solid retention sarg knob lets user lock bipod into position or disengage it with ease works with harris s style bipod only mounts to any stand mfg: zro delta. Find here reliable & durable gunsmith supplies including shooting bipod accessories by ZRO Delta. US supply MPN: 7.029E+11. Zro delta dloc s mounting system kit for harris s style bipod dloc s harris s style bipod mount. Distributor SKU: 100029452-100029452-10052.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair International Bipod Adapters Picatinny Bipod Adapter US Specs & Supply
USD 33.99
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: Our sinclair bi-pod adapters allow you to mount your sinclair or harris bi-pod to your accessory rail or picatinny rail equipped forend. All aluminum and steel construction insures a lifetime of use.Both accessory rail models will fit freeland and anschutz style accessory rails. The deluxe model is specially designed to nest in the cradle of the sinclair bi-pod and locks securely in position using two small cap screws, while the standard model slips in the accessory rail and is held in position by the tension created by tightening the bi-pod to the stock forend.Picatinny rail bi-pod adapter clamps securely in place using a steel socket screw and lets you install your bi-pod exactly w mfg: sinclair international. Find here reliable & durable gunsmith supplies including shooting bipod accessories by Sinclair. US supply MPN: 749-011-620. Sinclair international bipod adapters picatinny bipod adapter. Distributor SKU: 749011620-749001388-10052.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Trs25l Rail Adapter US Specs & Supply
USD 125.99
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: Perfect for positioning scopes, red dots, or back-up sights at just the right height, zrodelta's dloc-trs-25l rail adapter adds an extra 1" of height to your flattop receiver or forend rail. Super solid interface uses the dloc system with its multiple engagement points and three recoil lugs for a harder than the hubs of hades grip on any picatinny rail section. Heavy duty springs in the side bar ensure in the dloc mount grabs on to your rail and not fall off , even if the interface is not tightened! precision machined one piece body allowing for an overall stronger mount extended 2" length for longer optics designed to allow for quick detachment/a mfg: zro delta. Find here reliable & durable gunsmith supplies including shooting bipod accessories by ZRO Delta. US supply MPN: 7.029E+11. Zro delta dloc trs25l rail adapter. Distributor SKU: 100029451-100029451-10052.
More Details : click here
SEARCH this site : click here
|
|
|
Midwest Industries Picatinny Harris Type Bipod Qd Mount US Specs & Supply
USD 79.95
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: Qd mount for harris type bipods midwest industries incorporates on of the smoothest functioning qd levers on the market. Extremely smooth in operation with a multi-facetted adjustment nut to get the exact tension required without damaging the rail surface. Fully adjustable with no tools. Harris type bipod mounts weigh in at only 2.1 oz, is machined out of 6061 aluminum and hard coat anodized. Mfg: midwest industries, inc. Find here reliable & durable gunsmith supplies including shooting bipod accessories by Midwest. US supply MPN: MIQDBP. Midwest industries picatinny harris type bipod qd mount. Distributor SKU: 100018508-100018508-10052.
More Details : click here
SEARCH this site : click here
|
|
|
Kmw Long Range Solutions Lock Nut Pod Loc US Specs & Supply
USD 26.99
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: Spring loaded lever replaces the harris lock nut, provides plenty of leverage to lock or unlock the swivel using only your fingers. Provides a dust and dirt shield that protects the clutch mechanism from damage. Spring loaded lever may be parked against the stock to minimize snagging. Installation requires no modification to bipod. Used by the u.S. Military, nsn 1005-01-495-0843. Mfg: kmw long range solutions specs: synthetic handle, stainless steel mechanism, black, matte finish. Handle 1-1/2" (3.8cm) long. Fits harris s-series bipods. Find here reliable & durable gunsmith supplies including shooting bipod accessories by KMV. US supply MPN: 875. Kmw long range solutions lock nut pod loc. Distributor SKU: 100000326-100000326-10052.
More Details : click here
SEARCH this site : click here
|
|
|
Daniel Defense Keymod Bipod Adapter US Specs & Supply
USD 47.00
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: The daniel defense bipod mount adapter is designed for use on the daniel defense slim rail and other rail systems which utilize the keymod attachment method for mounting accessories. This lightweight adapter allows users to securely attach bipods with sling swivel stud mounts. 6061-t6 aluminum type iii hard coat black anodizing weighs less than 1 ounce! made in the usa! mfg: daniel defense. Find here reliable & durable gunsmith supplies including shooting bipod accessories by Daniel. US supply MPN: 314107228. Daniel defense keymod bipod adapter. Distributor SKU: 100018849-100018849-10052.
More Details : click here
SEARCH this site : click here
|
|
|
Gg&G Picatinny Bipod Adapter US Specs & Supply
USD 29.99
(Indicative price - actual current price possibly lower)
Shooting Bipod Accessories US Specs & Supply
US gunsmith supply: Bolt-on, low-profile adapter clamps to the picatinny rail on the underside of a tactical rifle's forearm to allow mounting of a swivel stud-mounted bipod. Expands the accessory mounting versatility of your rifle without requiring permanent alterations to the weapon. Cross-bolt and locking bar mechanism provides secure rail engagement, even on worn or undersize rails. Radiused edges, counter-sunk bolt head, and locking bar recessed into the mount body give a smooth, streamlined profile and help resist catching on sling, vegetation, or other gear. Precision machined from solid 6061 t6 aluminum billet and type iii hardcoat anodized for extra strength and corrosion resistance, with a hard, mfg: gg&g, inc. Specs: body, 6061 t6 aluminum, hardcoat anodized, matte black. Locking bar, cross-bolt, stud hardened steel, black oxide finish. 2ß?" (5.7cm) long, 1βό" (3.2cm) wide. Mount body extends 3⁄8" (9.5mm) below rail. 2.3 oz. (64g) weight. Find here reliable & durable gunsmith supplies including shooting bipod accessories by GG&G. US supply MPN: GGG1388. Gg&g picatinny bipod adapter. Distributor SKU: 336000028-336000028-10052.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gg&G Bipod Pss Adapter US Specs & Supply
|
 Copyright © USAGunsmith.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
